EKUAL TECH © 2010
Blowout
Preventers and Integrated Pumping Tees
The Production Blow Out Preventers can be used to pack off a pumping well by sealing on all rod sizes up to 1-1/2”.
The same rams are working like blind rams when the rods are not present.
Sealing is made by two rubber rams, steel reinforced. Our ram design allows a quick replacement of the rubber seals for an easy maintenance.
Working pressure for all the models is 2000 psi and the rams close on 0…1-1/2 rods.
Our Blow Out Preventers are available in all standard connections and combinations depending on the particularly conditions of every well.
Integrated Pumping Tees provide the same features but in addition they can replace the standard tees.
The Production Blow Out Preventers can be used to pack off a pumping well by sealing on all rod sizes up to 1-1/2”.
The same rams are working like blind rams when the rods are not present.
Sealing is made by two rubber rams, steel reinforced. Our ram design allows a quick replacement of the rubber seals for an easy maintenance.
Working pressure for all the models is 2000 psi and the rams close on 0…1-1/2 rods.
Our Blow Out Preventers are available in all standard connections and combinations depending on the particularly conditions of every well.
Integrated Pumping Tees provide the same features but in addition they can replace the standard tees.
PRODUCTION
BLOWOUT PREVENTERS
BLOWOUT PREVENTERS
Ekual Tech
4, Al. Vlahuta st.
105600, Campina
Prahova, Romania
Tel. ++40 244 374538
Fax ++40 244 334809
|
| Drive Units | ||
| Blowout Preventers | ||
| Torque Anchors | ||
| Centralizers | ||
| Others |